{"title":"MoFi","description":"\u003cp\u003eMoFi Electronics makes cartridges, phono stages, turntables, vinyl accessories and loudspeakers. Its cartridges are designed starting from where a record is born: the cutting lathe, like the one used at Mobile Fidelity Sound Lab, whose magnet layout they mirror.\u003c\/p\u003e\u003cp\u003eIn the catalogue: the StudioTracker, UltraTracker and MasterTracker moving-magnet cartridges and the UltraGold moving-coil, the StudioPhono phono stage, the StudioDeck+ and UltraDeck+ turntables, the Super Heavyweight record weights and the SourcePoint 8 and SourcePoint 10 loudspeakers, with dedicated low stands and upgrade kit.\u003c\/p\u003e","products":[{"product_id":"mofi-studiotracker-mm","title":"MoFi StudioTracker MM","description":"\u003ch2\u003eMoFi StudioTracker MM: moving-magnet cartridge with elliptical stylus\u003c\/h2\u003e\u003cp\u003eThe StudioTracker MM is a stereo moving-magnet cartridge from MoFi Electronics. Its design starts from the place where a record is born, namely the lathe that cuts the lacquer, such as the one in service at Mobile Fidelity Sound Lab: the V-Twin generator with two magnets follows the arrangement of the cutting head that traced the grooves in the first place.\u003c\/p\u003e\u003cp\u003eThe two magnets, strong yet low in mass, are set in a V shape and run parallel to the stereo grooves of the vinyl, so that the engraved details are read with precision. The body is polymer and the stylus is a bonded elliptical diamond fitted to an aluminium cantilever. MoFi describes the sound of this cartridge as rich, with a smooth and slightly forgiving treble. The stated load is 47 kOhm.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eType: stereo dual-magnet (MM), V-Twin generator\u003c\/li\u003e\u003cli\u003eStylus: bonded elliptical\u003c\/li\u003e\u003cli\u003eCantilever: aluminium\u003c\/li\u003e\u003cli\u003eBody: polymer\u003c\/li\u003e\u003cli\u003eOutput voltage: 3.5 mV\u003c\/li\u003e\u003cli\u003eFrequency response: from 20 to 20,000 Hz\u003c\/li\u003e\u003cli\u003eTracking force: from 1.8 to 2.2 g\u003c\/li\u003e\u003cli\u003eLoad impedance: 47 kOhm, with 100 pF capacitance\u003c\/li\u003e\u003cli\u003eWeight: 6.4 g\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697712238936,"sku":"mofiSTMM","price":379.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-studiotracker-mm-tre-quarti.jpg?v=1791463417"},{"product_id":"mofi-ultratracker-mm","title":"MoFi UltraTracker MM","description":"\u003ch2\u003eMoFi UltraTracker MM: moving-magnet cartridge with nude elliptical stylus\u003c\/h2\u003e\u003cp\u003eThe UltraTracker MM is a stereo moving-magnet cartridge from MoFi Electronics, conceived by studying how a record is cut on the lathe, of the kind used by Mobile Fidelity Sound Lab. The V-Twin generator with two magnets reproduces the geometry of the cutting head: two strong, light magnets set in a V shape and parallel to the grooves, to the benefit of tracking ability.\u003c\/p\u003e\u003cp\u003eThe body is machined from an aluminium billet and is well damped, to keep resonances in check and obtain tight, precise bass. The stylus is a nude elliptical diamond on an aluminium cantilever, chosen to follow the most complex dynamic passages without difficulty. The response is wide and extends at both ends of the band, up to 25,000 Hz. The stated load is 47 kOhm.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eType: stereo dual-magnet (MM), V-Twin generator\u003c\/li\u003e\u003cli\u003eStylus: nude elliptical\u003c\/li\u003e\u003cli\u003eCantilever: aluminium\u003c\/li\u003e\u003cli\u003eBody: billet aluminium, damped\u003c\/li\u003e\u003cli\u003eOutput voltage: 3.5 mV\u003c\/li\u003e\u003cli\u003eFrequency response: from 20 to 25,000 Hz\u003c\/li\u003e\u003cli\u003eTracking force: from 1.8 to 2.2 g\u003c\/li\u003e\u003cli\u003eLoad impedance: 47 kOhm, with 100 pF capacitance\u003c\/li\u003e\u003cli\u003eWeight: 9.7 g\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697712632152,"sku":"mofiUTMM","price":649.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-ultratracker-mm-tre-quarti.jpg?v=1791463430"},{"product_id":"mofi-mastertracker-mm","title":"MoFi MasterTracker MM","description":"\u003ch2\u003eMoFi MasterTracker MM: moving-magnet cartridge with Micro-Line stylus\u003c\/h2\u003e\u003cp\u003eThe MasterTracker MM is a stereo moving-magnet cartridge from MoFi Electronics. Like the other cartridges of the brand, it takes as its model the cutting lathe used by Mobile Fidelity Sound Lab: the V-Twin generator employs two strong magnets of low mass, set in a V shape and parallel to the grooves as in the cutting head. Among the models of the Tracker series it is the one with the lightest magnets.\u003c\/p\u003e\u003cp\u003eThe stylus is a Micro-Line diamond, with a profile similar to that of the tip that cuts the record, and it follows the groove walls with great precision; it is fitted to a tapered aluminium cantilever. The body, machined from an aluminium billet and well damped, controls resonances to the benefit of tight, precise bass. The coils are made of Ohno continuous-cast copper. The stated load is 47 kOhm.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eType: stereo dual-magnet (MM), V-Twin generator\u003c\/li\u003e\u003cli\u003eStylus: Micro-Line\u003c\/li\u003e\u003cli\u003eCantilever: tapered aluminium\u003c\/li\u003e\u003cli\u003eCoils: Ohno continuous-cast copper\u003c\/li\u003e\u003cli\u003eOutput voltage: 3 mV\u003c\/li\u003e\u003cli\u003eFrequency response: from 20 to 25,000 Hz\u003c\/li\u003e\u003cli\u003eTracking force: from 1.8 to 2.2 g\u003c\/li\u003e\u003cli\u003eLoad impedance: 47 kOhm, with 100 pF capacitance\u003c\/li\u003e\u003cli\u003eWeight: 9.7 g\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697713516888,"sku":"mofiMTMM","price":899.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-mastertracker-mm-tre-quarti.jpg?v=1791463445"},{"product_id":"mofi-ultragold-mc","title":"MoFi UltraGold MC","description":"\u003ch2\u003eMoFi UltraGold MC: moving-coil cartridge with nude Shibata stylus\u003c\/h2\u003e\u003cp\u003eThe UltraGold MC is a stereo moving-coil cartridge from MoFi Electronics, built in Japan under strict quality controls and voiced by ear by Allen Perkins, the founder of Spiral Groove. The declared goals are a very extended frequency response, crisp transients in the treble, dynamics and richness of detail, together with fidelity to the source and clean tracking.\u003c\/p\u003e\u003cp\u003eThe stylus is a nude diamond with a Shibata profile, fitted to a boron cantilever; the generator uses a neodymium magnet with a permendur yoke and coils of pure PCOCC copper, obtained by Ohno continuous casting. The aluminium body has threaded holes: two screws, with no nuts, are enough to fix it to a headshell or to an arm with an integral shell. The output is 0.4 mV and the recommended load is at least 100 Ohm.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eType: stereo dual moving-coil (MC)\u003c\/li\u003e\u003cli\u003eStylus: nude Shibata\u003c\/li\u003e\u003cli\u003eCantilever: boron\u003c\/li\u003e\u003cli\u003eOutput voltage: 0.4 mV\u003c\/li\u003e\u003cli\u003eFrequency response: from 20 to 35,000 Hz\u003c\/li\u003e\u003cli\u003eTracking force: from 1.8 to 2.2 g\u003c\/li\u003e\u003cli\u003eRecommended load: 100 Ohm or higher\u003c\/li\u003e\u003cli\u003eInternal impedance: 12 Ohm\u003c\/li\u003e\u003cli\u003eWeight: 7.3 g\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697714073944,"sku":"mofiULTRGLDMC","price":1849.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-ultragold-mc-tre-quarti.jpg?v=1791463458"},{"product_id":"mofi-studiophono","title":"MoFi StudioPhono","description":"\u003ch2\u003eMoFi StudioPhono: MM\/MC phono stage with adjustable gain and loading\u003c\/h2\u003e\u003cp\u003eThe StudioPhono is the MoFi Electronics phono stage for moving-magnet and moving-coil cartridges. It aims at the wide-band transparency required by the mastering engineers of Mobile Fidelity Sound Lab; Tim De Paravicini, the designer behind the Gain2 Ultra Analog cutting system of Mobile Fidelity, contributed to its internal circuitry.\u003c\/p\u003e\u003cp\u003eGain and loading are chosen with a row of toggle switches placed on the bottom of the unit, reachable without tools, and allow it to be matched to almost all MM and MC cartridges available. On the top panel two buttons engage the Mono mode and the subsonic filter: according to MoFi, with mono recordings the former improves image stability and tonal richness. The power supply is external.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eInputs: MM and MC cartridges\u003c\/li\u003e\u003cli\u003eSelectable gain: 40, 46, 60 or 66 dB\u003c\/li\u003e\u003cli\u003eMM load impedance: 47,000 Ohm\u003c\/li\u003e\u003cli\u003eMC load impedance: 75, 100 or 500 Ohm, or else 1k, 10k or 47k Ohm\u003c\/li\u003e\u003cli\u003eInput capacitance: 100 pF\u003c\/li\u003e\u003cli\u003eSwitchable Mono mode\u003c\/li\u003e\u003cli\u003eSwitchable subsonic filter\u003c\/li\u003e\u003cli\u003ePower: external power supply\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit, with external power supply.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697714237784,"sku":"mofiSPhono","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-studiophono-fronte.jpg?v=1791463471"},{"product_id":"mofi-sourcepoint-8","title":"MoFi SourcePoint 8","description":"\u003ch2\u003eMoFi SourcePoint 8: two-way standmount loudspeakers with 8-inch concentric driver\u003c\/h2\u003e\u003cp\u003eThe SourcePoint 8 are two-way bass-reflex standmount loudspeakers, developed by Andrew Jones and the MoFi Electronics team by scaling down the SourcePoint 10, to bring its acoustic approach into a more compact cabinet suited to a larger number of rooms. The core is a custom-made 8-inch concentric driver with a soft-dome tweeter of 1.25 inches at its centre: a point source in which the cone of the woofer works as the tweeter's waveguide.\u003c\/p\u003e\u003cp\u003eThe Twin-Drive magnet system, based on high-flux neodymium, generates a completely symmetrical field, to keep intermodulation distortion low. The sculpted front panel with several facets reduces diffraction; the fabric grilles are held in place magnetically and MoFi advises taking them off to obtain maximum performance. The terminals accept five types of connection.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eConfiguration: two-way, bass reflex\u003c\/li\u003e\u003cli\u003eDrivers: 8-inch concentric unit, soft-dome tweeter of 1.25 inches\u003c\/li\u003e\u003cli\u003eFrequency response: 47 Hz - 30 kHz\u003c\/li\u003e\u003cli\u003eSensitivity: 87 dB (2.83 V, 1 m)\u003c\/li\u003e\u003cli\u003eImpedance: 8 Ohm nominal, 6.4 Ohm minimum\u003c\/li\u003e\u003cli\u003eCrossover frequency: 1.6 kHz\u003c\/li\u003e\u003cli\u003ePower: 30 W recommended minimum, 150 W maximum input\u003c\/li\u003e\u003cli\u003eDimensions: width 290 mm, height 456 mm, depth 335 mm with grille (320 mm without)\u003c\/li\u003e\u003cli\u003eWeight: 12.7 kg each\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a pair, in White finish, without stands.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"White","offer_id":58697714860376,"sku":"mofiSP8WH","price":3000.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-sourcepoint-8-bianco-coppia.jpg?v=1791463486"},{"product_id":"mofi-sourcepoint-10","title":"MoFi SourcePoint 10","description":"\u003ch2\u003eMoFi SourcePoint 10: two-way standmount loudspeakers with 10-inch concentric driver\u003c\/h2\u003e\u003cp\u003eThe SourcePoint 10 are two-way bass-reflex standmount loudspeakers from MoFi Electronics, designed by Andrew Jones. The 10-inch concentric driver, the result of 18 months of research, has a paper-pulp cone that has to move very little to give a big, dynamic sound, and so forms a constant waveguide for the soft-dome tweeter of 1.25 inches mounted at its centre, which comes into play at 1.6 kHz. The Twin-Drive neodymium magnet system creates a symmetrical field to reduce intermodulation distortion.\u003c\/p\u003e\u003cp\u003eThe cabinet has MDF walls 1 inch thick, two internal braces and a faceted front panel in 2-inch MDF, finished in satin black, which limits diffraction. The fabric grilles are magnetic. With 91 dB of sensitivity and 8 Ohm nominal, 30 W are enough to drive them, with valve or transistor amplifiers.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eConfiguration: two-way, bass reflex\u003c\/li\u003e\u003cli\u003eDrivers: 10-inch concentric unit, soft-dome tweeter of 1.25 inches\u003c\/li\u003e\u003cli\u003eFrequency response: 42 Hz - 30 kHz\u003c\/li\u003e\u003cli\u003eSensitivity: 91 dB (2.83 V, 1 m)\u003c\/li\u003e\u003cli\u003eNominal impedance: 8 Ohm\u003c\/li\u003e\u003cli\u003eCrossover frequency: 1.6 kHz\u003c\/li\u003e\u003cli\u003ePower: 30 W recommended minimum, 200 W maximum input\u003c\/li\u003e\u003cli\u003eDimensions: width 368 mm, height 572 mm, depth 422 mm with grille (406 mm without)\u003c\/li\u003e\u003cli\u003eWeight: 21 kg each\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a pair, in Walnut finish, with real wood veneer, without stands.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Walnut","offer_id":58697735242072,"sku":"mofiSP10WN","price":4999.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-sourcepoint-10-noce-coppia.jpg?v=1791463500"},{"product_id":"mofi-sourcepoint-10-low-slung-stands","title":"MoFi SourcePoint 10 Low Slung Stands","description":"\u003ch2\u003eMoFi SourcePoint 10 Low Slung Stands: low, tilted stands for SourcePoint 10 speakers\u003c\/h2\u003e\u003cp\u003eThe Low Slung Stands are the stands that MoFi Electronics developed specifically for the SourcePoint 10 loudspeakers. They are built from quality wood and offer a solid base, in keeping with the look of the loudspeakers.\u003c\/p\u003e\u003cp\u003eThey keep the SourcePoint 10 close to the floor and tilt them at an angle worked out to optimise sound performance: the front part is taller than the rear one. Each stand rests on rubberised feet, which give stability and protect the floor from scratches.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatibility: MoFi SourcePoint 10 loudspeakers\u003c\/li\u003e\u003cli\u003eConstruction: wood, with rubberised feet\u003c\/li\u003e\u003cli\u003eHeight: 155 mm (6.1\") at the front, 91 mm (3.6\") at the rear\u003c\/li\u003e\u003cli\u003eDepth: 445 mm (17.5\")\u003c\/li\u003e\u003cli\u003eWidth: 330 mm (13\")\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697740681560,"sku":"mofiSP10LSS","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-sourcepoint-10-low-slung-stands-coppia.jpg?v=1791463514"},{"product_id":"mofi-sourcepoint-10-master-edition-upgrade-kit","title":"MoFi SourcePoint 10 Master Edition Upgrade Kit","description":"\u003ch2\u003eMoFi SourcePoint 10 Master Edition Upgrade Kit: upgrade crossovers for the SourcePoint 10\u003c\/h2\u003e\u003cp\u003eThe Master Edition Upgrade Kit from MoFi Electronics is a pair of crossovers that replaces the standard ones of the SourcePoint 10 loudspeakers, to upgrade them to the Master Edition version.\u003c\/p\u003e\u003cp\u003eThe new crossover includes a three-position selector for the tweeter level (High, Mid, Low), used to adapt the treble to the room: brighter, balanced or smoother. The replacement is done with an ordinary screwdriver. MoFi states as a result deeper bass, a sharper image and a lower background noise.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eCompatibility: MoFi SourcePoint 10 loudspeakers\u003c\/li\u003e\u003cli\u003eContents: Master Edition upgrade crossovers\u003c\/li\u003e\u003cli\u003eThree-position selector for the tweeter level: High, Mid, Low\u003c\/li\u003e\u003cli\u003eInstallation: with a standard screwdriver\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a pair.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697747399000,"sku":"mofiSP10UPKIT","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-sourcepoint-10-upgrade-kit-contenuto.jpg?v=1791463528"},{"product_id":"mofi-super-heavyweight","title":"MoFi Super Heavyweight","description":"\u003ch2\u003eMoFi Super Heavyweight: record weight in aluminium and polymer\u003c\/h2\u003e\u003cp\u003eThe Super Heavyweight is a record weight to be placed on the disc while listening. MoFi Electronics devised it with the collaboration of Mike Latvis, of the company Harmonic Resolution Systems (HRS), and it employs the proprietary polymer by Latvis, known for its ability to absorb noise.\u003c\/p\u003e\u003cp\u003eBesides coupling the disc to the platter, it reduces the noise of the groove, the motor and the bearing: the outcome, according to MoFi, is a quieter background, more detail and clarity, microdynamics and impact in the bass. The outer shell is 6061 aluminium machined from billet, easy to grasp; the soft polymer base does not harm records. The weight of 367.4 g is chosen so as not to stress the motor, bearing or suspension of the turntable.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWeight: 367.4 g\u003c\/li\u003e\u003cli\u003eDiameter: 76 mm (3.0\")\u003c\/li\u003e\u003cli\u003eHeight: 34 mm (1.355\")\u003c\/li\u003e\u003cli\u003eOuter shell: 6061 aluminium machined from billet\u003c\/li\u003e\u003cli\u003eBase: soft polymer\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697747497304,"sku":"mofySHeavy","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-super-heavyweight-tre-quarti.jpg?v=1791463539"},{"product_id":"mofi-super-heavyweight-champion","title":"MoFi Super Heavyweight Champion","description":"\u003ch2\u003eMoFi Super Heavyweight Champion: record weight for platters of medium to high mass\u003c\/h2\u003e\u003cp\u003eThe Super Heavyweight Champion is a record weight that MoFi Electronics designed together with Mike Latvis (Harmonic Resolution Systems), intended for turntables with a platter of medium or high mass. It employs a proprietary polymer of very high density, moulded with precision, which absorbs noise.\u003c\/p\u003e\u003cp\u003eIt couples the disc to the platter and reduces the noise of the groove, the motor and the bearing; MoFi states as its effect a quieter background, greater clarity, microdynamics and impact in the bass. The outer shell in aluminium machined from billet has a universal, unthreaded design, easy to grasp and simple to use. The soft polymer base protects the record labels.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eWeight: 495.1 g, suited to platters of medium to high mass (about 5 lb or more)\u003c\/li\u003e\u003cli\u003eDiameter: 76 mm (3.0\")\u003c\/li\u003e\u003cli\u003eHeight: 34 mm (1.355\")\u003c\/li\u003e\u003cli\u003eOuter shell: 6061 aluminium machined from billet\u003c\/li\u003e\u003cli\u003eBase: soft polymer\u003c\/li\u003e\u003cli\u003eBlack anodised top cap with laser-engraved MoFi logo\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58697747857752,"sku":"mofySHeavycp","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-super-heavyweight-champion-tre-quarti.jpg?v=1791463553"},{"product_id":"mofi-studiodeck-plus","title":"MoFi StudioDeck+","description":"\u003ch2\u003eMoFi StudioDeck+: belt-drive turntable with 10-inch tonearm and StudioTracker cartridge\u003c\/h2\u003e\u003cp\u003eThe StudioDeck+ is the belt-drive turntable that opens the MoFi Electronics range, here in the version with the StudioTracker cartridge already fitted to the tonearm. Designed and built in the United States, it plays records at 33 1\/3 or 45 RPM: the Delrin motor pulley has two positions, one for each speed.\u003c\/p\u003e\u003cp\u003eThe Studio tonearm, straight and made of aluminum, runs on gimbaled bearings and lets you adjust azimuth, VTA, anti-skate and tracking force. The AC synchronous motor is isolated from the chassis by damping materials, so its vibrations stay away from platter and stylus. The plinth pairs an aluminum plate with an MDF body to increase mass; the platter is made of Delrin and spins on an inverted bearing that combines steel, bronze and teflon.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBelt drive, speeds 33 1\/3 or 45 RPM\u003c\/li\u003e\u003cli\u003eAC synchronous motor running at 300 RPM\u003c\/li\u003e\u003cli\u003eStraight aluminum Studio tonearm, 254 mm (10\"), on gimbaled bearings\u003c\/li\u003e\u003cli\u003eOverhang 18 mm (0.71\"), offset angle 22.8 degrees adjustable by +\/- 2 degrees\u003c\/li\u003e\u003cli\u003eCartridges accepted by the tonearm: weight from 5 to 10 g\u003c\/li\u003e\u003cli\u003eDelrin platter, 19 mm (3\/4\"), weight 1.8 kg (3.88 lb)\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio of 72 dB; wow and flutter between 0.017% and 0.025%\u003c\/li\u003e\u003cli\u003eDimensions: 500 mm (19.69\") x 137 mm (5.375\") x 362 mm (14.25\")\u003c\/li\u003e\u003cli\u003eWeight: 8.7 kg (19.1 lb)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit, with the StudioTracker cartridge already fitted. The MoFi anti-vibration feet, developed together with Harmonic Resolution Systems (HRS), are included.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58699323572568,"sku":"mofiSD+","price":1849.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-studiodeck-tre-quarti.jpg?v=1791469826"},{"product_id":"mofi-ultradeck-plus","title":"MoFi UltraDeck+","description":"\u003ch2\u003eMoFi UltraDeck+: belt-drive turntable with 10-inch Ultra tonearm and UltraTracker cartridge\u003c\/h2\u003e\u003cp\u003eThe UltraDeck+ is a belt-drive turntable by MoFi Electronics, designed and built in the United States, here in the version with the UltraTracker cartridge already fitted to the tonearm. It plays records at 33 1\/3 or 45 RPM: the Delrin motor pulley has two positions, one for each speed. The synchronous motor is isolated from the chassis by damping materials.\u003c\/p\u003e\u003cp\u003eThe Ultra tonearm uses low-friction ball bearings on both the vertical and the horizontal plane, and is wired by Cardas Audio from the headshell leads to the gold-plated RCA connectors. The plinth pairs three aluminum plates with an MDF body to increase mass. The Delrin platter has a high mass, which lowers the noise floor, and spins on an inverted hardened-steel bearing that combines steel, bronze and sapphire.\u003c\/p\u003e\u003ch3\u003eTechnical features\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBelt drive, speeds 33 1\/3 or 45 RPM\u003c\/li\u003e\u003cli\u003eAC synchronous motor running at 300 RPM\u003c\/li\u003e\u003cli\u003eStraight aluminum Ultra tonearm, 254 mm (10\"), on gimbaled bearings\u003c\/li\u003e\u003cli\u003eOverhang 18 mm (0.71\"), offset angle 22.8 degrees adjustable by +\/- 2 degrees\u003c\/li\u003e\u003cli\u003eCartridges accepted by the tonearm: weight from 5 to 10 g\u003c\/li\u003e\u003cli\u003eDelrin platter, 33 mm (1.3\"), weight 3.1 kg (6.8 lb)\u003c\/li\u003e\u003cli\u003eSignal-to-noise ratio of 74 dB; wow and flutter between 0.017% and 0.025%\u003c\/li\u003e\u003cli\u003eDimensions: 500 mm (19.69\") x 152 mm (6\") x 362 mm (14.25\")\u003c\/li\u003e\u003cli\u003eWeight: 10.5 kg (23.1 lb)\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eAvailable versions\u003c\/h3\u003e\u003cp\u003eSold as a single unit, with the UltraTracker cartridge already fitted. The MoFi anti-vibration feet, developed together with Harmonic Resolution Systems (HRS), are included.\u003c\/p\u003e","brand":"MoFi","offers":[{"title":"Default Title","offer_id":58699340153176,"sku":"mofiUD+","price":3100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/files\/mofi-ultradeck-tre-quarti.jpg?v=1791469840"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0615\/5278\/7645\/collections\/MoFi-logo-brand-su-videosell.jpg?v=1791463614","url":"https:\/\/videosell.eu\/collections\/mofi.oembed","provider":"Videosell store","version":"1.0","type":"link"}