Two-way converter between optical S/PDIF audio and Dante
The Blustream DA22OPT links a source or a receiver with an optical connection to a Dante audio network, working in both directions: Toslink to Dante and Dante to Toslink.
On its optical input the DA22OPT takes two S/PDIF channels and places them on the network as a Dante stream; in the opposite direction it collects two channels from the network and plays them out on the optical output. Dante Controller can also tie the input straight to the output of the same unit. Setup is done through a built-in web page, where input sensitivity and output gain are adjusted. It is a plug and play device: it draws power from the switch over PoE and, if the switch cannot supply it, accepts a local 12 V adapter (the PS121PH, available separately). It also handles AES67 transport over RTP. Typical uses are bringing TV, player or tuner audio onto the network, or feeding an amplifier that has an optical input.
Key features
- 2-channel encoding and decoding between optical S/PDIF and Dante
- Sampling from 44.1 up to 96 kHz, with 16 to 32-bit resolution
- Dante latency adjustable between 2 and 10 ms
- Input sensitivity and output gain adjustable from +6 to -24 dB
- Works with AES67 RTP transport
- Built-in web interface for settings and control
- Class 0 PoE (IEEE 802.3af) or local 12 V power
Connections
The DA22OPT carries one RJ45 port for the 100 Mbps Dante network and two Toslink optical sockets, one input and one output. The housing measures 120 x 47 x 26 mm, it weighs 0.3 kg packed and it operates from 0 to 40 °C. The box contains the unit and a quick guide.