Inline HDMI control module with automation, CEC and IP
The HD11CTRL-V2 is a controller placed on the HDMI line between source and screen that automates the running of a single zone: display power on and off, commands to other devices and responses to events.
Actions can be started by RS-232, IR or IP commands, by HDMI signal detection or by external contacts such as sensors and push buttons; on the output side the module drives the display over IP, IR, RS-232 or CEC and, through its relays, devices like motorised projector screens. Setup is done in a web interface. Along the HDMI path it also helps overcome EDID, HDCP, compatibility and handshake problems, frequent with 4K signals. It passes 18 Gbps HDMI 2.0 with HDR up to 4K at 60 Hz in 4:4:4 and, with the Smart-Scale function, can turn a 4K input into a 1080p output (the 4:2:2 colour space is not supported).
Key features
- Up to 10 macros, each with a maximum of 10 commands
- Automatic display handling over IP, IR, RS-232 or CEC
- Learning of up to 30 IR commands
- Two relay outputs and one sensor input
- Smart-Scale conversion from 4K to 1080p
- Multichannel bitstream audio, object-based formats included
- HDCP 2.2 with advanced EDID handling
Connections
19-pin HDMI type A input and output; 3-pole Phoenix for RS-232; RJ45 for TCP/IP control; 3.5 mm minijack for the IR emitter; two 3-pole Phoenix terminals for the relays and one for the sensor; 4-way DIP switch for EDID; USB-A for updates. Power is 12 V 1 A. Size 145 x 28 x 84 mm.
Box contents
Module, 12 V 1 A power supply, IR emitter, RS-232 control cable, mounting kit and quick guide.
