Three passive LCR channels in one slim enclosure
Totem Kin Force is a passive three-channel on-wall system using six 4-inch MHEX woofers and three soft-dome tweeters with titanium elements.
Left, centre and right channels are built into one cabinet for installation close to a display. Each channel uses two woofers and one tweeter, allowing connection to three separate amplifier or AV-receiver channels.
Key features
- Passive three-channel LCR configuration.
- 6 x 4-inch MHEX woofers in total.
- 3 x 1-inch titanium-infused soft-dome tweeters.
- Specified frequency response of 57 Hz-21 kHz ±3 dB.
- 90 dB sensitivity and 6-ohm impedance per channel.
- Rated power handling spans 20-125 W RMS.
- Slim cabinet approximately 8.9 cm deep.
- Bracket supports horizontal or vertical mounting.
A complete front stage without three separate cabinets
Kin Force is useful when a true LCR front stage is required but space does not allow three independent speakers. Six MHEX woofers provide substantial radiating area, while separate tweeters preserve electrical channel division and correct management from an AV processor.
Installation around the display
With 90 dB sensitivity and a 6-ohm load it is relatively easy to drive. Response begins at 57 Hz, so a subwoofer is a natural partner in cinema systems. It is especially appropriate for living rooms, TV spaces and wall-mounted installations where depth must remain minimal without giving up a true multichannel front stage. Each section remains electrically independent, allowing the processor to apply level, delay and room correction separately to all three channels. This is the key advantage over a passive soundbar that combines functions without preserving true LCR management. Because the three channels remain discrete, conventional bass management and channel calibration from an AV receiver remain fully available.
